General notice to order.
-The price will be displayed only when you have selected and entered all required options (optional boxes marked with *).
-Leather color must be entered directly as text.
-We ask for your understanding as a setting to introduce you to various options.
Order Guide
Step 1. Select leather type
Step 2. Enter leather color as text
Step 3. Select the remaining required options
Step 4. Select additional options if necessary
You can place an order after checking the selected option and price.
This item has been added to your cart.
Should I order it along with the items in my shopping cart?
Arte di mano
Handcrafted by JnK
[PARTS] Spare parts for Carrying toptube cover
* This product is a purchase page for parts used for the Brompton Carrying top tube cover, and the leather products in the photo are not included.
* When purchasing the carrying top tube, the following components are all included in the product. This is a spare part for damage or loss.
*
1. Short brass screws (2 pieces per set)
This is the part that holds and presses the upper and lower surfaces of the handle. It is recommended that it be slightly shorter than the total thickness of the leather.
2. Long brass screws (2 pieces per set)
Two T8 wrenches are required for the screws connecting the handlebar and top tube cover.
A total of 2 are required for connecting the handle.
3. T8 L-Shape Wrench (2 pieces per set)
T8 wrench for tightening long brass screws on both sides, sold as a set of two.
.
Regarding the screw installation of bicycle parts.
*Basically, all screw parts used in bicycle accessories must be strongly tightened during installation, as loosening of screws may occur due to vibration from continuous driving.
* After installation, check it a few times after riding during the initial driving, and if loosening occurs, tighten it once more so that it does not loosen well in subsequent driving.
* In long-term use, vibration accumulates, so periodic checks are required. If necessary, anti-loosening solutions can be used to prevent loosening.
Arte di mano for Bicycle project.
The result of a new category that is first planned according to our own needs from the main hobby we share at the leather workshop JnK starts from our riding experience accumulated over the years.
We design various products that do not harm the exterior of the bike and harmonize naturally with the components to improve the aesthetics.
We do not design designs that can produce a lot in a short time, or designs that can lower the price by reducing effort. We want to put in enough effort to produce quality productions that will last a long time.
New designs that contain JnK's own thoughts and philosophy will be the beginning of a pleasant choice that you have never experienced before. ;)
Working period
All of our works is based on Order to made system. And period is depend on the kind of product.
Bags : About 6-12 weeks usually.
Camera cases : About 6-8 weeks usually.
Camera straps & small goods : About 6-8 weeks usually.
Leather skins : About 3-5 weeks usually.
Shipping
We use Fedex shipping service with tracking number. It take about 3-5 business days usually.
Tax & Duty.
Tax or Duty are not included in price. Tax and Duty will be decide by your local custom and it is just on your treat. If you need any other help about this, please contact us before order.
We refuse any type of return because of Tax or Duty, in this case you just can get a refund except all kind of cost.
Return policy.
If there is quality issue or something wrong about order detail, we will do our best to solve the problem and we will accept return and refund. But because it is order to made product, we do not accept return or refund without quality issue.
Payment.
We accept paypal payment. If you need bank transfer, please contact us by email.
Change order detail.
Basically after order, you can't change order detail. Just if we do not start the work about the part that you request, we can arrange it as your request. If you need any help about changing, please let me know. And then we will check it but we just can't sure the order can change as your request.
Arte di mano
Handcrafted by JnK
[PARTS] Spare parts for Carrying toptube cover
* This product is a purchase page for parts used for the Brompton Carrying top tube cover, and the leather products in the photo are not included.
* When purchasing the carrying top tube, the following components are all included in the product. This is a spare part for damage or loss.
*
1. Short brass screws (2 pieces per set)
This is the part that holds and presses the upper and lower surfaces of the handle. It is recommended that it be slightly shorter than the total thickness of the leather.
2. Long brass screws (2 pieces per set)
Two T8 wrenches are required for the screws connecting the handlebar and top tube cover.
A total of 2 are required for connecting the handle.
3. T8 L-Shape Wrench (2 pieces per set)
T8 wrench for tightening long brass screws on both sides, sold as a set of two.
.
Regarding the screw installation of bicycle parts.
*Basically, all screw parts used in bicycle accessories must be strongly tightened during installation, as loosening of screws may occur due to vibration from continuous driving.
* After installation, check it a few times after riding during the initial driving, and if loosening occurs, tighten it once more so that it does not loosen well in subsequent driving.
* In long-term use, vibration accumulates, so periodic checks are required. If necessary, anti-loosening solutions can be used to prevent loosening.
Arte di mano for Bicycle project.
The result of a new category that is first planned according to our own needs from the main hobby we share at the leather workshop JnK starts from our riding experience accumulated over the years.
We design various products that do not harm the exterior of the bike and harmonize naturally with the components to improve the aesthetics.
We do not design designs that can produce a lot in a short time, or designs that can lower the price by reducing effort. We want to put in enough effort to produce quality productions that will last a long time.
New designs that contain JnK's own thoughts and philosophy will be the beginning of a pleasant choice that you have never experienced before. ;)
Working period
All of our works is based on Order to made system. And period is depend on the kind of product.
Bags : About 6-12 weeks usually.
Camera cases : About 6-8 weeks usually.
Camera straps & small goods : About 6-8 weeks usually.
Leather skins : About 3-5 weeks usually.
Shipping
We use Fedex shipping service with tracking number. It take about 3-5 business days usually.
Tax & Duty.
Tax or Duty are not included in price. Tax and Duty will be decide by your local custom and it is just on your treat. If you need any other help about this, please contact us before order.
We refuse any type of return because of Tax or Duty, in this case you just can get a refund except all kind of cost.
Return policy.
If there is quality issue or something wrong about order detail, we will do our best to solve the problem and we will accept return and refund. But because it is order to made product, we do not accept return or refund without quality issue.
Payment.
We accept paypal payment. If you need bank transfer, please contact us by email.
Change order detail.
Basically after order, you can't change order detail. Just if we do not start the work about the part that you request, we can arrange it as your request. If you need any help about changing, please let me know. And then we will check it but we just can't sure the order can change as your request.