Porsche Molding smart key case
Arte di mano
Handcrafted by JnK
Porsche Key case
Sample leather - Rally bordo (Italy / Walpier, Vegatable tanned)
-General information about car key case-
- For vehicle smart key products, please be sure to check the key shape in the photo before ordering.
- Even with the same brand, keys may differ depending on the year and vehicle model, and are not compatible with other key types.
- Please check the button arrangement in advance through the photos. If no selection options are provided, one key configuration is provided.
- In this case, due to the nature of the product, products with different key arrangements can be used by pressing the corresponding location of button,
but the button arrangement cannot be changed.
- For cases that is in the reasons, refunds or exchanges are not possible after production due to the custom nature of the product.
* If you would like to make a key case for a car model that is not registered on the website, please contact us through the Q&A board or email.
.
<From left : Buttero yellow / Crocodile black / Crocodile deep sea blue / Buttery navy
.
#1
"
What is the most appropriate design?
"
While working with leather for the past 18 years, I have watched various trends in car key case design pass by.
We launched several product lines and tried producing them in various forms.
The conclusion regarding smart keys that usually fit in a pocket or bag is:
It will be easy to check and implement the intuitive functions of each key,
Must have a good grip in the hand,
And above all, minimize the increase in volume.
And it was impossible to escape the conclusion that the form that satisfies all the conditions is a molded key case
that corresponds 1:1 with smart key design and sophisticated fitting.
We are now introducing the molded key case that we prepared after a long period of preparation.
.
#2
"
Molding,
The most traditional and longest-consuming design
"
The molding technique is a water molding technique,
a traditional leather craft technique that utilizes the properties of leather to become flexible when wet with water and to harden during the drying process.
Basically, the water forming technique requires a pair of three-dimensional molds, a male and a female,
that are precisely designed considering the thickness,
and it takes about 3-4 days, including drying time, to make one molded part with a pair of molds.
Basically, molding has the property of shrinking after taking shape,
so in order to minimize this, it is necessary to maintain a mold bonding state that is difficult to dry.
Since full-scale production is possible after the production of molded parts, this technique is basically impossible for mass work.
The quantity that can be made from one mold without stopping for a month is only about 5-8 pieces.
Nevertheless, the reason we chose this irrational production method is,
Just one thing,
this is because we think this is the most suitable shape for the key case.
.
#3
"
What would be different if we made it?
"
'Manufacturer of the world’s most expensive Leica camera case'
and
‘Quality, more quality’
These are the most representative words that describe Arte di mano.
The products of JnK, a leather workshop that uses painstaking production processes and traditional handcrafting techniques aimed solely at quality,
have been chosen by Leica users, who are known for being picky, in the global market simply by word of mouth about their quality.
Starting with its entry into Hong Kong camera boutiques in 2011 and the US Leica store in 2013,
it has established dealerships in the UK as well as Asian countries such as Taiwan, Indonesia, Singapore, and the Philippines.
We are a global brand that exports more than 80% of its production to customers around the world. .
At present, it has become the most expensive high-end case brand loved by Leica users around the world for the highest quality cases.
.
Leather tag and finger strap accessories in the photo are not included in the basic configuration.
The difference in results resulting from strict quality control, responsibility as a producer,
and differences in detailed processes that have been built up one after another, results in incomparable quality.
'If we make the same product, we can make it best.'
'If we make it with the same quality, we can make it the fastest.'
This is the confidence of the team members that has been strengthened over the 18 years that JnK has walked.
We do not sacrifice quality for productivity,
We don't sacrifice productivity for quality.
We have steadily developed products that meet uncompromising high quality standards with recipes optimized for team production.
Although we are not fast by any means, we are confident that no other company can produce products of the same quality as quickly as we do.
This is a key case that is delicately finished with an elaborately crafted mold combined with JnK's skilled handcrafting techniques.
Since its establishment in 2007, leather workshop JnK has consistently produced a variety of water molding products for camera devices.
Before making a firm decision for Key Case, we stopped producing products using molding techniques in recent years due to low productivity.
However, because we have been using this technique for a long time, we have a wealth of experience and know-how regarding molding techniques.
It maintains a shape that perfectly corresponds to the smart key,
but is sufficiently flexible so as not to interfere with the operation of the key. It is not a single layer of hard leather, but a combination of leather with different properties, ensuring sufficient flexibility and usability no matter which leather you choose.
* 내부 가죽의 재질과 색상은 물성에 맞추어 예고 없이 변경될 수 있습니다.* The material and color of the interior leather may change without notice depending on the physical properties.
.
#4
"
Quality starts with ingredients.
It is made with care and effort using selected ingredients.
"
Basically, all leather and accessories provided are high-quality materials selected through the eyes of producers who value quality.
We offer vegetable tanned leather produced by a renowned vegetable company and world-class mineral tanned leather used by luxury brands in a variety of colors.
The fixing bolt, which is made by turning stainless steel on a lathe, uses full stainless steel screws that leave the processing method intact on the surface and retain the rather stylish hairline texture.
The provided key ring is nickel satin plated and has the unique satin hairline finish, making it very luxurious.
* If you select the optional Brass version, the screw will be changed to natural brass and the key ring will be changed to antique satin plating.
.
Free optional
silver/brass
When selecting the basic silver color: Supplied with stainless steel screw + silver (nickel satin plated) key ring.
When choosing the color brass: Supplied with brass screw + antique (antique satin plating) key ring.
* However, only silver color is available for the additional accessories below.
.
#5
"
To the precious person
With sincerity and value
"
The precious products that contain the value of handmade are delivered in a neat Arte di mano exclusive box.
The exclusive box contains the brand's philosophy on the value of handmade.
*The size of the box may vary depending on the product.
OPTION
1. Leather tag
EXTRA COST
Normal : USD 20.00
Lizard : USD 30.00
Crocodile : USD 50.00
Only silver color is available and natural brass set is not available.
Leather tags with unique metal decorations are an accessory for engraving initials or car numbers.
The metal decoration is likewise a high-quality joint decoration in nickel satin plating.
.
2. Finger strap
* Manufacturing method and cost vary depending on the leather selected. Please refer to the leather list below before ordering before selecting an option.
EXTRA COST
Without stich : USD 28.00 / Rally, Minerva box, Dollaro, Buttero, Buttero box, Labraror, Pueblo, Achab, Camoflage, Chromexcel, Novonappa
With stitch : USD 38.00 / Goat, Swift, Nappa, Shrunken calf, Caviar
Lizard : USD 58.00
Crocodile : USD 108.00
Metal decoration is only available in silver color and natural brass set is not available. / Stitching, etc. may be added depending on the leather.
It is an accessory that can be easily hung on a finger, etc., and like a leather tag, initials can be engraved on it.
The metal is decorated with nickel satin with a hairline finish.
.
3. Engraving of personal initial
EXTRA COST
Laser engrave : USD 10.00 (Laser engraving, some soot may remain depending on the leather)
Basic engrave : USD 15.00 (Using corrosion plate. Shallow depth, may leave imprints on the edge of plate)
Advanced engrave : USD 70.00 : (Using copper plate, more depth and clarity)
Personal initials on this product are an option provided only if you purchase additional accessories (Leather tag, Finger strap) for engraving initials.
Since engraving is not possible on the basic key case,
please be sure to purchase additional products(Leather tag, Finger strap) for engraving when applying for initials.
- The leather tag and finger strap can have different initials engraved on both sides. In this case, you must order a total of two initials. (Example: Car number on one side, initials, phone number, etc. on the other side)
- If you are engraving the same initials on both sides, please order only one initial and write down your request or contact us individually. (By default, tags and initials are engraved on only one side when applying.)
*If you want more readable initials, we recommend engraving using a Advanced engrave (USD 70.00).
However, in the case of crocodile leather, due to the deep embossing of the leather, engraving is possible only with Advanced engrave (USD 70.00).
You can engrave your personal initials on all Arte di mano products.
Please apply as follows.
Text: / Font:
Example) Text: JnK-handworks / Font: inkburrow
And if you requested it before, you can request the same words without extra cost.
Because we keep your initial panel if you made before.
Color chart
Rally
(Vegatable tanned, Italy - AUSONIA)
Extra cost : none
Finish - Matt type, milling, parafiin / Softness - ★★☆☆☆
It is an oil-pull-up leather produced by Ausonia, one of Italy's famous tenries, and Walpier, which makes leather using only traditional processes.
It contains rich oils and two-tone natural colors shown in the bent area by adding two colors one after the other and dyeing them. It is an attractive leather change. With natural milling and vintage color, the paraffin that has been piled up on the surface becomes more and more subtle with its use, and it becomes more attractive over time. Among the soft types of leather, it is the toughest leather. The surface dyeing treatment is very unique, so it is recommended for those who like natural and vintage leather products. The Rally volpe color is also Arte di mano's best-selling color.
.
Minerva Box
(Vegatable tanned, Italy - BADALASSI CARLO)
Extra cost : none
Finish - Matt type, milling / Softness - ★★★★★
BADALASSI CARLO's Minerva box leather is a full vegetable leather that is made from cows grown in the Alps.
Unlike the initial matte feel, the natural luster that gradually rises as you use it has enough flavor to be treated as premium leather. In addition, the unique soft touch of the Minerva box, which is composed of rich oils, is excellent. It is the softest leather among soft types of leather.
.
Dollaro
(Vegatable tanned, Italy - Walpier)
Extra cost : none
Finish - Natural glossy type, Embossed(Shrunken pattern), Hand brushed two tone dye / Hardness - ★★★★☆
This is a article developed by Walpier, the renowned Italian tannery, best known as Buttero.
Based on Buttero's original processing method and dyeing technique-After embossing a pattern on the surface, it is hand-dyed again to make the protruding part darker with a two-tone dyeing that has a natural luster and strong impression. Basically, vegetable leather has the characteristic that the feeling of use remains natural, but Dollaro has a surface rigidity compared to general vegetable leather, so it is a vegetable leather and is very resistant to scratches.
.
Buttero
(Vegatable tanned, Italy - Walpier)
Extra cost : none
Finish - Matt type, Oil, Hard type / Hardness - ★★★★☆
This is Buttero, a representative article produced by Walpier, Tannery, which has been the third generation family business and produces the finest leather in Italy.
The leather is vegetable-processed using the finest French hides. It has a very smooth surface and at the same time has a rich oil content, which makes it the best quality leather that boasts a moist touch despite being vegetable. Despite its smooth surface, it has a rich and deep color that is clearly distinguished from other vegetable leathers with the unique touch of leather, rather than an artificial feel, and the unique color expression of Buttero. Like other leathers containing a lot of oil, it is relatively weak against scratches, but the natural traces of the years passed by the accumulation of scratches are more attractive than any other leather. This leather is especially loved in Japan.
.
new!
Buttero box
(Vegatable tanned, Italy - Walpier)
Extra cost : none
Finish - Matt type, Oil, Milling / Softness - ★★★☆☆
It is a leather that has been milled on Buttero-based leather, a representative article produced by Tannery Walpier, a third generation family business and produces the finest leather in Italy, to obtain the natural pattern and softness of the surface.
The thickness of the unadjusted ledger is 2.8~3.0mm, the same as the Buttero, which is thicker than the Minerva box, and the tensile strength is stronger even at the same thickness. Compared to the Minerva box of the same color, the color density is a little heavier.Especially, when making a strap due to the difference in thickness, it is recommended when making a strap with a single layer method because it adds a sense of thickness and makes it possible to make a stronger strap It is a leather offering.
.
Labrador
(Vegatable tanned, Italy - Rocaros.r.l)
Extra cost : none
Finish - Natural glossy type, Hand brushed dye / Hardness - ★★★☆☆
Labrador is a cowhide made in Rocado, Italy, famous for its Italian shell cordovan. Inspired by the fur texture of the large breed Labrador, it creates a smooth and silky surface texture. It is a type of leather that is surface-dyed with leather that has a deep color similar to that of a cordovan familiar to us.
.
Goat skin
(chrome tanned, France - Alran)
Extra cost : none
Finish - matt type / Thickness - 1.2 ~ 1.4 mm / softness - ★★☆☆☆
Alran, a French company, is a tannery that manufactures leathers for real luxury brands, including Hermes, and has a reputation for producing the finest leathers in goth skins.
Goat leather is soft but has tough properties. Unlike vegetable leather, whose surface ages with use, the surface is very scratch-resistant and the product is slightly lighter. Also, since the original color is maintained for a long time, it is recommended for those who are more sensitive to the condition of the surface. You can enjoy a vivid color that is difficult to express in vegetable leather.
.
Pueblo
(Vegatable tanned, Italy - BADALASSI CARLO)
Extra cost : USD 10.00
Finish - Matt type, Art finish by steel ball / Hardness - ★★★☆☆
Pueblo is an art-finish leather from BADALASSI CARLO, a tannery famous for the Minerva box.
It is a leather that expresses details by rolling specially crafted iron beads on Minerva leather with a flat surface to create fine artificial scratches on the leather. When viewed in the state of a director, it is rather similar to a wounded leather, but if you look at the finished work as a product, you can see the expression of texture as an artistic attempt beyond that. Please refer to the result. It is a popular leather that is increasingly in demand around the world. It is recommended for those who enjoy the vintage feel.
Achab
(Vegatable tanned, Italy - BADALASSI CARLO)
Extra cost : USD 10.00
Finish - Natural glossy, Art finish by hand blade / Softness - ★★★☆☆
Achab is an art finish leather from BADALASSI CARLO, a tannery famous for its Minerva box.
It is a unique leather that is finished by making irregular sheaths one by one using a hand knife on the milled Minerva box leather. Produced solely on an intuitive sense, it is an extremely lyrical leather made only by one master crafter, even within the leather-producing tannery. The result is very dramatic, even more passionate compared to the same art-finish line, Pueblo. You can see the stylish expression of texture as an artistic attempt. Please refer to the result. It is recommended for those who enjoy a more bold and vintage style.
.
Camoflage
(Vegatable tanned, Italy - La Perla Azzurra)
Extra cost : USD 10.00
Finish - Matt type, Milling / Hardness - ★★☆☆☆
Camouflage with military patterns on high-quality vegetable leather.
It is a leather that is constantly popular with its enthusiastic expression. Along with the military look, you can enjoy the natural vegetable leather texture and the stylish features of aging.
.
Chromexcel
(Combination tanned, USA - Horween)
Extra cost : USD 20.00
Finish - Matt type, Pull-up / Hardness - ★★★☆☆
It is Chromexcel leather, a representative cowhide of Horween in the United States, which is famous for cordovan.
This leather is finished with a rough surface finish unique to American leather and a natural two-tone pull-up finish that occurs at the folds. This leather is also famous as a material for shoes, and if you like the rough feeling of American leather or leather goods, it is a leather that is worth experiencing at least once. You'll find attractive leather goods that are finished with rough American leather and refined leather craftsmanship by Arte di mano.
.
Novonappa
(Hybrid tanned, France - HAAS)
Extra cost : USD 20.00
Finish - Matt type, Oil and waxy / Thickness - 2.0 ~ 2.2 mm / Softness - ★★★★☆
Novonappa leather is a hybrid type of leather with a vegetable finish on the surface of chrome-tanned leather.
Because it is chrome tanned, it is lighter than vegetable leather products, but the texture of the surface is like vegetable tanned leather, and the surface of the leather naturally ages according to use. In addition, the texture of the surface is very soft and moist due to the sufficiently absorbed wax and oil content. This is another kind of texture that can be found in the hybrid type, which is different from the vegetable type. Like Bridle, when not used often, the wax component inside the leather cuts off the surface to form a white powdery film, and when used again, the wax component melts again and penetrates to restore the original surface texture. This is the original leather of HAAS, France, which is a supplier of High-end luxury brands, and is used by the brand to create vegetable-looking tan or black products.
.
Swift
(Chrome tanned, France, Spain)
Extra cost : USD 20.00
Finish - Matt type, natural grain / Softness - ★★★★★
The leather that Leica usually used for Edition. Swift leather looks like patternless, but has a low and dense pattern. It has a soft and smooth touch.
Nappa
(Chrome tanned, Italy - mastrotto)
Extra cost : USD 20.00
Finish - Matt type, natural grain / Softness - ★★★★★
The Italian Mastrotto's nappa leather is particularly popular for furniture and car seats.
It is used by luxury car brands such as Lamborghini, Bentley, Porsche, and luxury sofas that you are familiar with. It has good expressive power of color and has similar characteristics to Swift as a leather, and it is a leather with a very soft and smooth touch.
Shrenken-calf
(Chrome tanned, Germany - LEDERFABRIK PERLINGER )
Extra cost : USD 20.00
Finish - Matt type, natural shrunken emboss / Softness - ★★★★★
Shrunken calf leather is a leather that is made of a unique shrunken pattern by chrome-tanning calf leather less than 6 months old and shrinking the surface through shrunken processing. It features a soft and very elastic surface texture. It is difficult to enjoy aging because it is chrome tanned leather, but it has the advantage of being relatively light when commercialized, being resistant to scratches, and retaining the original color or texture for a longer time.
German PERLINGER's Shrunken Calf is actually the leather used in Hermes' production, and is more widely known under the name 'Togo'.
Caviar
(Chrome tanned, France - HAAS)
Extra cost : USD 20.00
Finish - Glossy type, Caviar embossed / Softness - ★★★☆☆
Caviar is a very famous leather used by Luxury brand. It is the leather made by HAAS, France. It is an attractive product with a very slight pearlescent luster.
This is usually conceivable with the name caviar. The smaller of the two sizes, it is a good pattern size for small items or small bags. Made from calfskin.
.
Lizard skin
(Real lizard skin, indonesia)
Extra cost : USD 80.00
Finish - Glossy type
It is a lizard skin with a lot of fans. This leather is characterized by an attractive luster and a dense surface pattern, and is very durable due to the high tensile strength of the surface. Among the special skins, it is widely used because the price is rather reasonable.
.
Crocodile leather
(Nile crocodile, Singapore - Henglong)
Extra cost : USD 180.00
Finish - Matt type, Belly (back cut)
Henglong, a Singapore-based company owned by LVMH, the parent company of Louis Vuitton, is a world-class crocodile skin tannery that produces high-quality crocodile skins. Crocodile leather is superior to other types of leather such as cowhide in terms of durability because it has excellent surface stiffness in addition to its unique texture and unique pattern.
Nile crocodile is regarded as the highest quality crocodile hide along with Porosus, a saltwater crocodile, and the Alligator, which lives mainly in the United States.
In the case of a glossy-type crocodile, its luster disappears when it is not taken care of while using it, whereas a matte-type crocodile leather has the attractiveness of natural light coming up nicely while using it and aging over time. Like cowhide, matte type leather has less surface treatment compared to glossy type, so it has no choice but to use raw hide with less scarring, and it is traded at a higher price than glossy crocodile at the same grade/size.
If you see the work of Arte di mano, which combines the finest crocodile leather manufactured by Henglong and the refined Arte di mano craftsmanship recognized in the world market, you are sure that you will no longer be able to find materials and quality beyond that.
IMPORTANT NOTICE
1. About Duty & Tax - Especially for US customer
Basically all duties and taxes are imposed by the importing country on the importer, and are the responsibility of the importer, not the producer.
We've recently received a significant number of inquiries from consumers in the United States regarding duties and taxes. This is due to the US government's decision to eliminate the de minimis exemption and establish additional duties. Details are below.
Starting August 29, 2025, the de minimis exemption for all international shipments to the US will be discontinued, and all imports valued at $800 or less will now be subject to duties and taxes. The rates vary by item, and additional duties may apply in addition to the base rate.
While all countries are the same, for US citizens, duties and taxes are imposed by the US government on US citizens, and are imposed on the importer and user, not the producer. Please keep this in mind.
2. Important Policy Changes Regarding Refunds Upon PayPal Payment Cancellations
PayPal charges a 4.4% fee to sellers by default, which is non-refundable in the event of a refund. For example, if a payment of USD 1,000.00 is immediately refunded, the seller will pay a USD 44.00 fee to PayPal for the transaction, even though no actual purchase was made. This fee is non-refundable. This is especially true for simple refunds, as well as frequent changes in transaction amounts due to changes in options or purchases of other products.
For this reason, refunds or partial refunds requested by PayPal customers will be returned as credits that can be used at any time on our website. This policy applies to PayPal payments only. Please note that refunds and partial refunds are available as before for other payment methods.
BASIC NOTICE
1. Working period
All of our works is based on Order to made system. And period is depend on the kind of product.
Bags : About 16-18 weeks usually.
Camera cases : About 8-12weeks usually.
Camera straps & small goods : About 8-12weeks usually.
Leather skins : About 6-8 weeks usually.
2. Shipping (After work)
We use Fedex shipping service with tracking number. It take about 3-5 business days usually.
3. Tax & Duty
Tax or Duty are not included in price. Tax and Duty will be decide by your local custom and it is just on your treat. If you need any other help about this, please contact us before order.
We refuse any type of return because of Tax or Duty, in this case you just can get a refund except all kind of cost.
4. Return policy
If there is quality issue or something wrong about order detail, we will do our best to solve the problem and we will accept return and refund. But because it is order to made product, we do not accept return or refund without quality issue.
5. Payment
We accept several payment. But if you use paypal payment, please check about refund policy on important notice
6. Change order detail
In principle, order details cannot be changed after an order is placed. However, since production time includes waiting time, if actual work on your requested item has not yet begun, we can accommodate your request. If you need assistance with a change, please let us know as soon as possible. We will review and revise your order, but we cannot guarantee that your request will be processed as requested.
Arte di mano
Handcrafted by JnK
Porsche Key case
Sample leather - Rally bordo (Italy / Walpier, Vegatable tanned)
-General information about car key case-
- For vehicle smart key products, please be sure to check the key shape in the photo before ordering.
- Even with the same brand, keys may differ depending on the year and vehicle model, and are not compatible with other key types.
- Please check the button arrangement in advance through the photos. If no selection options are provided, one key configuration is provided.
- In this case, due to the nature of the product, products with different key arrangements can be used by pressing the corresponding location of button,
but the button arrangement cannot be changed.
- For cases that is in the reasons, refunds or exchanges are not possible after production due to the custom nature of the product.
* If you would like to make a key case for a car model that is not registered on the website, please contact us through the Q&A board or email.
.
<From left : Buttero yellow / Crocodile black / Crocodile deep sea blue / Buttery navy
.
#1
"
What is the most appropriate design?
"
While working with leather for the past 18 years, I have watched various trends in car key case design pass by.
We launched several product lines and tried producing them in various forms.
The conclusion regarding smart keys that usually fit in a pocket or bag is:
It will be easy to check and implement the intuitive functions of each key,
Must have a good grip in the hand,
And above all, minimize the increase in volume.
And it was impossible to escape the conclusion that the form that satisfies all the conditions is a molded key case
that corresponds 1:1 with smart key design and sophisticated fitting.
We are now introducing the molded key case that we prepared after a long period of preparation.
.
#2
"
Molding,
The most traditional and longest-consuming design
"
The molding technique is a water molding technique,
a traditional leather craft technique that utilizes the properties of leather to become flexible when wet with water and to harden during the drying process.
Basically, the water forming technique requires a pair of three-dimensional molds, a male and a female,
that are precisely designed considering the thickness,
and it takes about 3-4 days, including drying time, to make one molded part with a pair of molds.
Basically, molding has the property of shrinking after taking shape,
so in order to minimize this, it is necessary to maintain a mold bonding state that is difficult to dry.
Since full-scale production is possible after the production of molded parts, this technique is basically impossible for mass work.
The quantity that can be made from one mold without stopping for a month is only about 5-8 pieces.
Nevertheless, the reason we chose this irrational production method is,
Just one thing,
this is because we think this is the most suitable shape for the key case.
.
#3
"
What would be different if we made it?
"
'Manufacturer of the world’s most expensive Leica camera case'
and
‘Quality, more quality’
These are the most representative words that describe Arte di mano.
The products of JnK, a leather workshop that uses painstaking production processes and traditional handcrafting techniques aimed solely at quality,
have been chosen by Leica users, who are known for being picky, in the global market simply by word of mouth about their quality.
Starting with its entry into Hong Kong camera boutiques in 2011 and the US Leica store in 2013,
it has established dealerships in the UK as well as Asian countries such as Taiwan, Indonesia, Singapore, and the Philippines.
We are a global brand that exports more than 80% of its production to customers around the world. .
At present, it has become the most expensive high-end case brand loved by Leica users around the world for the highest quality cases.
.
Leather tag and finger strap accessories in the photo are not included in the basic configuration.
The difference in results resulting from strict quality control, responsibility as a producer,
and differences in detailed processes that have been built up one after another, results in incomparable quality.
'If we make the same product, we can make it best.'
'If we make it with the same quality, we can make it the fastest.'
This is the confidence of the team members that has been strengthened over the 18 years that JnK has walked.
We do not sacrifice quality for productivity,
We don't sacrifice productivity for quality.
We have steadily developed products that meet uncompromising high quality standards with recipes optimized for team production.
Although we are not fast by any means, we are confident that no other company can produce products of the same quality as quickly as we do.
This is a key case that is delicately finished with an elaborately crafted mold combined with JnK's skilled handcrafting techniques.
Since its establishment in 2007, leather workshop JnK has consistently produced a variety of water molding products for camera devices.
Before making a firm decision for Key Case, we stopped producing products using molding techniques in recent years due to low productivity.
However, because we have been using this technique for a long time, we have a wealth of experience and know-how regarding molding techniques.
It maintains a shape that perfectly corresponds to the smart key,
but is sufficiently flexible so as not to interfere with the operation of the key. It is not a single layer of hard leather, but a combination of leather with different properties, ensuring sufficient flexibility and usability no matter which leather you choose.
* 내부 가죽의 재질과 색상은 물성에 맞추어 예고 없이 변경될 수 있습니다.* The material and color of the interior leather may change without notice depending on the physical properties.
.
#4
"
Quality starts with ingredients.
It is made with care and effort using selected ingredients.
"
Basically, all leather and accessories provided are high-quality materials selected through the eyes of producers who value quality.
We offer vegetable tanned leather produced by a renowned vegetable company and world-class mineral tanned leather used by luxury brands in a variety of colors.
The fixing bolt, which is made by turning stainless steel on a lathe, uses full stainless steel screws that leave the processing method intact on the surface and retain the rather stylish hairline texture.
The provided key ring is nickel satin plated and has the unique satin hairline finish, making it very luxurious.
* If you select the optional Brass version, the screw will be changed to natural brass and the key ring will be changed to antique satin plating.
.
Free optional
silver/brass
When selecting the basic silver color: Supplied with stainless steel screw + silver (nickel satin plated) key ring.
When choosing the color brass: Supplied with brass screw + antique (antique satin plating) key ring.
* However, only silver color is available for the additional accessories below.
.
#5
"
To the precious person
With sincerity and value
"
The precious products that contain the value of handmade are delivered in a neat Arte di mano exclusive box.
The exclusive box contains the brand's philosophy on the value of handmade.
*The size of the box may vary depending on the product.
OPTION
1. Leather tag
EXTRA COST
Normal : USD 20.00
Lizard : USD 30.00
Crocodile : USD 50.00
Only silver color is available and natural brass set is not available.
Leather tags with unique metal decorations are an accessory for engraving initials or car numbers.
The metal decoration is likewise a high-quality joint decoration in nickel satin plating.
.
2. Finger strap
* Manufacturing method and cost vary depending on the leather selected. Please refer to the leather list below before ordering before selecting an option.
EXTRA COST
Without stich : USD 28.00 / Rally, Minerva box, Dollaro, Buttero, Buttero box, Labraror, Pueblo, Achab, Camoflage, Chromexcel, Novonappa
With stitch : USD 38.00 / Goat, Swift, Nappa, Shrunken calf, Caviar
Lizard : USD 58.00
Crocodile : USD 108.00
Metal decoration is only available in silver color and natural brass set is not available. / Stitching, etc. may be added depending on the leather.
It is an accessory that can be easily hung on a finger, etc., and like a leather tag, initials can be engraved on it.
The metal is decorated with nickel satin with a hairline finish.
.
3. Engraving of personal initial
EXTRA COST
Laser engrave : USD 10.00 (Laser engraving, some soot may remain depending on the leather)
Basic engrave : USD 15.00 (Using corrosion plate. Shallow depth, may leave imprints on the edge of plate)
Advanced engrave : USD 70.00 : (Using copper plate, more depth and clarity)
Personal initials on this product are an option provided only if you purchase additional accessories (Leather tag, Finger strap) for engraving initials.
Since engraving is not possible on the basic key case,
please be sure to purchase additional products(Leather tag, Finger strap) for engraving when applying for initials.
- The leather tag and finger strap can have different initials engraved on both sides. In this case, you must order a total of two initials. (Example: Car number on one side, initials, phone number, etc. on the other side)
- If you are engraving the same initials on both sides, please order only one initial and write down your request or contact us individually. (By default, tags and initials are engraved on only one side when applying.)
*If you want more readable initials, we recommend engraving using a Advanced engrave (USD 70.00).
However, in the case of crocodile leather, due to the deep embossing of the leather, engraving is possible only with Advanced engrave (USD 70.00).
You can engrave your personal initials on all Arte di mano products.
Please apply as follows.
Text: / Font:
Example) Text: JnK-handworks / Font: inkburrow
And if you requested it before, you can request the same words without extra cost.
Because we keep your initial panel if you made before.
Color chart
Rally
(Vegatable tanned, Italy - AUSONIA)
Extra cost : none
Finish - Matt type, milling, parafiin / Softness - ★★☆☆☆
It is an oil-pull-up leather produced by Ausonia, one of Italy's famous tenries, and Walpier, which makes leather using only traditional processes.
It contains rich oils and two-tone natural colors shown in the bent area by adding two colors one after the other and dyeing them. It is an attractive leather change. With natural milling and vintage color, the paraffin that has been piled up on the surface becomes more and more subtle with its use, and it becomes more attractive over time. Among the soft types of leather, it is the toughest leather. The surface dyeing treatment is very unique, so it is recommended for those who like natural and vintage leather products. The Rally volpe color is also Arte di mano's best-selling color.
.
Minerva Box
(Vegatable tanned, Italy - BADALASSI CARLO)
Extra cost : none
Finish - Matt type, milling / Softness - ★★★★★
BADALASSI CARLO's Minerva box leather is a full vegetable leather that is made from cows grown in the Alps.
Unlike the initial matte feel, the natural luster that gradually rises as you use it has enough flavor to be treated as premium leather. In addition, the unique soft touch of the Minerva box, which is composed of rich oils, is excellent. It is the softest leather among soft types of leather.
.
Dollaro
(Vegatable tanned, Italy - Walpier)
Extra cost : none
Finish - Natural glossy type, Embossed(Shrunken pattern), Hand brushed two tone dye / Hardness - ★★★★☆
This is a article developed by Walpier, the renowned Italian tannery, best known as Buttero.
Based on Buttero's original processing method and dyeing technique-After embossing a pattern on the surface, it is hand-dyed again to make the protruding part darker with a two-tone dyeing that has a natural luster and strong impression. Basically, vegetable leather has the characteristic that the feeling of use remains natural, but Dollaro has a surface rigidity compared to general vegetable leather, so it is a vegetable leather and is very resistant to scratches.
.
Buttero
(Vegatable tanned, Italy - Walpier)
Extra cost : none
Finish - Matt type, Oil, Hard type / Hardness - ★★★★☆
This is Buttero, a representative article produced by Walpier, Tannery, which has been the third generation family business and produces the finest leather in Italy.
The leather is vegetable-processed using the finest French hides. It has a very smooth surface and at the same time has a rich oil content, which makes it the best quality leather that boasts a moist touch despite being vegetable. Despite its smooth surface, it has a rich and deep color that is clearly distinguished from other vegetable leathers with the unique touch of leather, rather than an artificial feel, and the unique color expression of Buttero. Like other leathers containing a lot of oil, it is relatively weak against scratches, but the natural traces of the years passed by the accumulation of scratches are more attractive than any other leather. This leather is especially loved in Japan.
.
new!
Buttero box
(Vegatable tanned, Italy - Walpier)
Extra cost : none
Finish - Matt type, Oil, Milling / Softness - ★★★☆☆
It is a leather that has been milled on Buttero-based leather, a representative article produced by Tannery Walpier, a third generation family business and produces the finest leather in Italy, to obtain the natural pattern and softness of the surface.
The thickness of the unadjusted ledger is 2.8~3.0mm, the same as the Buttero, which is thicker than the Minerva box, and the tensile strength is stronger even at the same thickness. Compared to the Minerva box of the same color, the color density is a little heavier.Especially, when making a strap due to the difference in thickness, it is recommended when making a strap with a single layer method because it adds a sense of thickness and makes it possible to make a stronger strap It is a leather offering.
.
Labrador
(Vegatable tanned, Italy - Rocaros.r.l)
Extra cost : none
Finish - Natural glossy type, Hand brushed dye / Hardness - ★★★☆☆
Labrador is a cowhide made in Rocado, Italy, famous for its Italian shell cordovan. Inspired by the fur texture of the large breed Labrador, it creates a smooth and silky surface texture. It is a type of leather that is surface-dyed with leather that has a deep color similar to that of a cordovan familiar to us.
.
Goat skin
(chrome tanned, France - Alran)
Extra cost : none
Finish - matt type / Thickness - 1.2 ~ 1.4 mm / softness - ★★☆☆☆
Alran, a French company, is a tannery that manufactures leathers for real luxury brands, including Hermes, and has a reputation for producing the finest leathers in goth skins.
Goat leather is soft but has tough properties. Unlike vegetable leather, whose surface ages with use, the surface is very scratch-resistant and the product is slightly lighter. Also, since the original color is maintained for a long time, it is recommended for those who are more sensitive to the condition of the surface. You can enjoy a vivid color that is difficult to express in vegetable leather.
.
Pueblo
(Vegatable tanned, Italy - BADALASSI CARLO)
Extra cost : USD 10.00
Finish - Matt type, Art finish by steel ball / Hardness - ★★★☆☆
Pueblo is an art-finish leather from BADALASSI CARLO, a tannery famous for the Minerva box.
It is a leather that expresses details by rolling specially crafted iron beads on Minerva leather with a flat surface to create fine artificial scratches on the leather. When viewed in the state of a director, it is rather similar to a wounded leather, but if you look at the finished work as a product, you can see the expression of texture as an artistic attempt beyond that. Please refer to the result. It is a popular leather that is increasingly in demand around the world. It is recommended for those who enjoy the vintage feel.
Achab
(Vegatable tanned, Italy - BADALASSI CARLO)
Extra cost : USD 10.00
Finish - Natural glossy, Art finish by hand blade / Softness - ★★★☆☆
Achab is an art finish leather from BADALASSI CARLO, a tannery famous for its Minerva box.
It is a unique leather that is finished by making irregular sheaths one by one using a hand knife on the milled Minerva box leather. Produced solely on an intuitive sense, it is an extremely lyrical leather made only by one master crafter, even within the leather-producing tannery. The result is very dramatic, even more passionate compared to the same art-finish line, Pueblo. You can see the stylish expression of texture as an artistic attempt. Please refer to the result. It is recommended for those who enjoy a more bold and vintage style.
.
Camoflage
(Vegatable tanned, Italy - La Perla Azzurra)
Extra cost : USD 10.00
Finish - Matt type, Milling / Hardness - ★★☆☆☆
Camouflage with military patterns on high-quality vegetable leather.
It is a leather that is constantly popular with its enthusiastic expression. Along with the military look, you can enjoy the natural vegetable leather texture and the stylish features of aging.
.
Chromexcel
(Combination tanned, USA - Horween)
Extra cost : USD 20.00
Finish - Matt type, Pull-up / Hardness - ★★★☆☆
It is Chromexcel leather, a representative cowhide of Horween in the United States, which is famous for cordovan.
This leather is finished with a rough surface finish unique to American leather and a natural two-tone pull-up finish that occurs at the folds. This leather is also famous as a material for shoes, and if you like the rough feeling of American leather or leather goods, it is a leather that is worth experiencing at least once. You'll find attractive leather goods that are finished with rough American leather and refined leather craftsmanship by Arte di mano.
.
Novonappa
(Hybrid tanned, France - HAAS)
Extra cost : USD 20.00
Finish - Matt type, Oil and waxy / Thickness - 2.0 ~ 2.2 mm / Softness - ★★★★☆
Novonappa leather is a hybrid type of leather with a vegetable finish on the surface of chrome-tanned leather.
Because it is chrome tanned, it is lighter than vegetable leather products, but the texture of the surface is like vegetable tanned leather, and the surface of the leather naturally ages according to use. In addition, the texture of the surface is very soft and moist due to the sufficiently absorbed wax and oil content. This is another kind of texture that can be found in the hybrid type, which is different from the vegetable type. Like Bridle, when not used often, the wax component inside the leather cuts off the surface to form a white powdery film, and when used again, the wax component melts again and penetrates to restore the original surface texture. This is the original leather of HAAS, France, which is a supplier of High-end luxury brands, and is used by the brand to create vegetable-looking tan or black products.
.
Swift
(Chrome tanned, France, Spain)
Extra cost : USD 20.00
Finish - Matt type, natural grain / Softness - ★★★★★
The leather that Leica usually used for Edition. Swift leather looks like patternless, but has a low and dense pattern. It has a soft and smooth touch.
Nappa
(Chrome tanned, Italy - mastrotto)
Extra cost : USD 20.00
Finish - Matt type, natural grain / Softness - ★★★★★
The Italian Mastrotto's nappa leather is particularly popular for furniture and car seats.
It is used by luxury car brands such as Lamborghini, Bentley, Porsche, and luxury sofas that you are familiar with. It has good expressive power of color and has similar characteristics to Swift as a leather, and it is a leather with a very soft and smooth touch.
Shrenken-calf
(Chrome tanned, Germany - LEDERFABRIK PERLINGER )
Extra cost : USD 20.00
Finish - Matt type, natural shrunken emboss / Softness - ★★★★★
Shrunken calf leather is a leather that is made of a unique shrunken pattern by chrome-tanning calf leather less than 6 months old and shrinking the surface through shrunken processing. It features a soft and very elastic surface texture. It is difficult to enjoy aging because it is chrome tanned leather, but it has the advantage of being relatively light when commercialized, being resistant to scratches, and retaining the original color or texture for a longer time.
German PERLINGER's Shrunken Calf is actually the leather used in Hermes' production, and is more widely known under the name 'Togo'.
Caviar
(Chrome tanned, France - HAAS)
Extra cost : USD 20.00
Finish - Glossy type, Caviar embossed / Softness - ★★★☆☆
Caviar is a very famous leather used by Luxury brand. It is the leather made by HAAS, France. It is an attractive product with a very slight pearlescent luster.
This is usually conceivable with the name caviar. The smaller of the two sizes, it is a good pattern size for small items or small bags. Made from calfskin.
.
Lizard skin
(Real lizard skin, indonesia)
Extra cost : USD 80.00
Finish - Glossy type
It is a lizard skin with a lot of fans. This leather is characterized by an attractive luster and a dense surface pattern, and is very durable due to the high tensile strength of the surface. Among the special skins, it is widely used because the price is rather reasonable.
.
Crocodile leather
(Nile crocodile, Singapore - Henglong)
Extra cost : USD 180.00
Finish - Matt type, Belly (back cut)
Henglong, a Singapore-based company owned by LVMH, the parent company of Louis Vuitton, is a world-class crocodile skin tannery that produces high-quality crocodile skins. Crocodile leather is superior to other types of leather such as cowhide in terms of durability because it has excellent surface stiffness in addition to its unique texture and unique pattern.
Nile crocodile is regarded as the highest quality crocodile hide along with Porosus, a saltwater crocodile, and the Alligator, which lives mainly in the United States.
In the case of a glossy-type crocodile, its luster disappears when it is not taken care of while using it, whereas a matte-type crocodile leather has the attractiveness of natural light coming up nicely while using it and aging over time. Like cowhide, matte type leather has less surface treatment compared to glossy type, so it has no choice but to use raw hide with less scarring, and it is traded at a higher price than glossy crocodile at the same grade/size.
If you see the work of Arte di mano, which combines the finest crocodile leather manufactured by Henglong and the refined Arte di mano craftsmanship recognized in the world market, you are sure that you will no longer be able to find materials and quality beyond that.
IMPORTANT NOTICE
1. About Duty & Tax - Especially for US customer
Basically all duties and taxes are imposed by the importing country on the importer, and are the responsibility of the importer, not the producer.
We've recently received a significant number of inquiries from consumers in the United States regarding duties and taxes. This is due to the US government's decision to eliminate the de minimis exemption and establish additional duties. Details are below.
Starting August 29, 2025, the de minimis exemption for all international shipments to the US will be discontinued, and all imports valued at $800 or less will now be subject to duties and taxes. The rates vary by item, and additional duties may apply in addition to the base rate.
While all countries are the same, for US citizens, duties and taxes are imposed by the US government on US citizens, and are imposed on the importer and user, not the producer. Please keep this in mind.
2. Important Policy Changes Regarding Refunds Upon PayPal Payment Cancellations
PayPal charges a 4.4% fee to sellers by default, which is non-refundable in the event of a refund. For example, if a payment of USD 1,000.00 is immediately refunded, the seller will pay a USD 44.00 fee to PayPal for the transaction, even though no actual purchase was made. This fee is non-refundable. This is especially true for simple refunds, as well as frequent changes in transaction amounts due to changes in options or purchases of other products.
For this reason, refunds or partial refunds requested by PayPal customers will be returned as credits that can be used at any time on our website. This policy applies to PayPal payments only. Please note that refunds and partial refunds are available as before for other payment methods.
BASIC NOTICE
1. Working period
All of our works is based on Order to made system. And period is depend on the kind of product.
Bags : About 16-18 weeks usually.
Camera cases : About 8-12weeks usually.
Camera straps & small goods : About 8-12weeks usually.
Leather skins : About 6-8 weeks usually.
2. Shipping (After work)
We use Fedex shipping service with tracking number. It take about 3-5 business days usually.
3. Tax & Duty
Tax or Duty are not included in price. Tax and Duty will be decide by your local custom and it is just on your treat. If you need any other help about this, please contact us before order.
We refuse any type of return because of Tax or Duty, in this case you just can get a refund except all kind of cost.
4. Return policy
If there is quality issue or something wrong about order detail, we will do our best to solve the problem and we will accept return and refund. But because it is order to made product, we do not accept return or refund without quality issue.
5. Payment
We accept several payment. But if you use paypal payment, please check about refund policy on important notice
6. Change order detail
In principle, order details cannot be changed after an order is placed. However, since production time includes waiting time, if actual work on your requested item has not yet begun, we can accommodate your request. If you need assistance with a change, please let us know as soon as possible. We will review and revise your order, but we cannot guarantee that your request will be processed as requested.
